9/8/2023 0 Comments Reolink client install1 by default (the NVR is accessible at that address if you connect a PC to a spare camera port) Connecting an unactivated camera to one of the ports will allow the NVR to allocate an address (using plug and play) in the … Unable to connect camera, message:connection timed out, I made 3 attempts. But outside the home network is painful to get connect to any off those cameras. ipsw format) and relaunch the iOS update. Navigate to Configuration > Advanced Settings > Platform Access and make sure the box is ticked. *Check motion.Abnormal connection of camera unable to display. *Blue iris - trigger tab- motion sensor- objection det - edit *Enter camera name, make both the same, just one word Then you can copy this to new cameras and sync from one camera if you like. This is settings to add camera to blueiris. Really creates a bad look when you install the app and does not launch of the bat, you know. I feel that users that want or need hardware-acceleration can then turn it on. So i guess the Temp path is hardcoded in the app :facepalmĪlso If anyone from Reolink eventually read this, for the sake of compatibility, as default please set the hardware-acceleration to false. I'll keep an eye on it for about 30min or so, but here is what i saw:ĮDIT: Looking at the footage recorded with the windows client it looks terrible, and I ensured the stream type is set to "Clear" but it still looks like balanced.If I compare the output from the Clear feed it really looks bad, dont know if its a bug or what.ĮDIT: I can confirm installing the app on another drive does not resolve the writes to %APPDATA%\.\Local\Temp the system that i used to test does have 32gb ram, but i did not notice any increase in ram usage over the 10min testing. I noticed i periodic write to the pagefile.sys at anything between 4mb/s and 11mb/s. while having the app installed on C Drive and recording to D Drive, there is a constant low write to %APPDATA%\.\Local\Temp for each stream being recorded, but not even near 5mb/s2. Hey, I think i recreated your situation a little bit.Please use Windows built in "Resource Monitor" and navigate to the Disk tab.For my test I just ordered the lists on "Total" This isn't like anything I've ever come across with CCTV systems - they usually write directly to wherever they're pointed, not using the C drive as a cache.Īny advice please? My experience with ReoLink has not been great so far, I'm only using the client because the cameras run so poorly using BlueIris. I can see when a file is finished recording (reached 30mins) it then transfers it to the E drive/HDD. I'm not even sure why the activity is showing on the C drive but I've monitored it using crystaldisk and it's getting absolutely hammered with writes - I can't find any temp folder or where it's writing to. Given the C drive is flash based, it is not going to last long with the constant writes before consuming the specced TBW. 5mbps constant write, in addition to the usual OS drive overheads equates to over 400gb of writes per day - going to a drive that isn't even storing the footage. However - there is a constant 5 mb per second write to the C drive that does not occur when the client is closed, or recording is disabled. Reolink client installed on the C drive (SSD) Windows 2019, Dell T5810 - 10 core Xeon, 64GB DDR4 ECC RAM, M.2 SSD to host the OS & programs, 18TB HDD for footage. I'm running 2x 4k & 1x 1080p ReoLink cameras on my home server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |